GANESH GTW-26 26” HEAVY DUTY ENGINE LATHE

CAPACITY & DIMENSIONS
Swing over Bed
26″ (660 mm)

Center Height
13″ (330 mm)

Swing over Cross Slide
18 1/16″ (460 mm)

Swing thru Gap
33 1/4″ (845 mm)

Length of Gap in front of D1-11 face plate
6 1/2″ (165 mm)

Bed Width
16 1/8″ (400 mm)

SPINDLE
Spindle Motor Horsepower
15 HP 12 kw

Spindle Speeds – 12 speeds 15 – 1,200 RPM (high to low)

Spindle Bore
4 1/8″ (105 mm)

Spindle Nose
D1-11 Camlock (A1-11 optional)

Spindle taper in Spindle Nose
MT-8 Morse Taper #8

Spindle taper reduction sleeve provided
MT-5 MT-8 to MT-5

Spindle Max Weight Capacity (Chuck Only)
660 lbs (300 kgs)

Spindle Max Weight Capacity (Chuck and Tailstock)
1,650 lbs (750 kgs)

Spindle Max Weight Capacity (Chuck, Steady Rest & Tailstock)
3,300 lbs. (1,500 kgs)

CARRIAGE
Cross Slide Travel
14.96″ (380 mm)

Cross Slide Width
7 3/32″ (180 mm)

Cross Slide lead screw pitch
.200″ / rev

Cross Slide resolution per division
0.001″ (on diameters)

Carriage Lead Screw Diameter
1 1/2″ (38 mm)

Carriage Lead Screw Pitch
4 TPI (6 mm pitch)

COMPOUND
Compound Top Side Travel
10″(255 mm)

Compound Top Slide Width
4 11/32″ (110 mm)

Cutting Tool Height Maximum
1.0″ x 1.0″ (25 mm x 25 mm)

TAILSTOCK (2 SPEED QUILL ADVANCE)
Quill Diameter
2 15/16″ (75 mm)

Quill Stroke
6 5/16″ (160 mm)

Quill Taper
MT-5 Morse Taper #5

Tailstock body set-over adjustment
±0.04″ ±1 mm

THREAD CUTTING
Thread Cutting Range – 60 inch pitches
2 –112 TPI 2 –112 TPI

Thread Cutting Range – 60 metric pitches
0.2 – 14 mm 0.2 – 14 mm

Thread Cutting Range – 50 diametral pitches
4 – 112 D.P. 4 – 112 D.P.

Thread Cutting Range – 50 module pitches
0.2 – 7 M.P. 0.2 – 7 M.P.

FEEDS
Feeds – Longitudinal – 50 Feeds
0.0014″ – 0.0387″/ rev. (0.037 – 1.04 mm / rev)

Feeds – Cross – 50 Feeds
0.0007″ – 0.01935″/rev. (0.0185 – 0.52 mm/ rev)

Coolant System
1/8 HP Pump Motor / 5 Gallon (20 L) Tank Capacity

Power Requirements
220 vac / 3 Phase / 40 amps (440 vac optional)