GANESH GMV-1F / 2F CNC 9” X 42”– 50″ CNC PLUS MILL

TABLE
GMV-1F Table Size (W x L)
9″ x 42″

GMV-2F Table Size (W x L)
9″ x 50″

T-Slot Width (3 T-Slots)
5/8″ T-Slots with ground reference edges (15.9 mm)

CNC Table Load Capacity (Evenly Distributed)
900 lbs (408 kgs)

MACHINE TRAVELS & CAPACITY
Travels may be reduced by limit switches, ballscrew bumpers, CNC etc
Table Travel – X Axis (under CNC control)
GMV-1F 26″ GMV-2F 31.5″

Cross Travel – Y Axis
11.4″

Knee Travel – Z Axis
16″ (406 mm)

Ram Travel
17.7″ (450 mm)

Spindle Nose-to-Table Surface Travel
2″ – 18″ (50 – 457 mm)

Quill Travel – Z Axis in 3-Axis Version
5″ (127 mm) (manual & Powerfeed travel w/o 3rd)

Quill Feeds – With Trip Release – Inch
0.0015″ / 0.003″ / 0.006″

Quill Feeds – With Trip Release – Metric
0.04 mm / 0.08 mm / 0.16 mm

Quill Diameter
3-3/8″ (85.725 mm)

Ballscrews (X & Y)
0.200″ per rev.

Adjustable scale ring display resolution
0.001″ (5 mm)

SPINDLE HEAD
Head Tilt (Left-to-Right)
90° – 0 – 90°

Head Tilt (Front-to-Back / Up-Down)
45° – 0 – 38°

Head Swivel
360°

Spindle Motor
3 HP / 3 Phase / 208 –240 vac

Spindle Taper
R-8 (ISO 30-taper optional)

Spindle Runout
0.0002″ maximum runout (0.005 mm)

Spindle Bearings
Fafnir ABEC-7 matched set of Class-7 bearings

Variable Speed Drive – Dual Range
60 – 500 RPM (low-range) / 500 – 4,500 RPM (high-range)

NOTE: 6,000 RPM Spindle available with optional AC Inverter Spindle Head

DIMENSIONS & WEIGHT
Power Requirements
220 vac ±5% / 3 Phase

Machine Weight
2,407 lbs (1,200 kgs)