Used 2016 GANESH VFM-2818 | Vertical Machining Centers

GEN MILL-2818 OEM TECHNICAL SPECIFICATIONS:

X-Travel 27.95” 710mm
Y-Travel 17.716” 450mm
Z-Travel 18.11” 460mm
Spindle Nose to Table Surface 5.11”– 23.62” 150 – 600mm
Spindle Center to Z-axis way covers 17.71” 450mm (throat dimension)
Max. Table Load 2,205 lbs. 1000 kgs load
SPINDLE
Spindle Motor – S1/S2/S3=7.5/11/15kw 20-HP S3 power (15-HP 30-min. duty rated)
Spindle Speed – Inline Direct-Drive 12,000rpm (15,000rpm optional)
Spindle Torque 50 ft-lb @ 1,500 rpm
Tool Type CAT #40 Taper BT #40 optional
Spindle Runout ≤ 0.000040” T.I.R.
Spindle Bearings - Front 95mm NSK 70BNR P4 class-7 bearings
Spindle Bearings - Rear 95mm NSK 70BNR P4 class-7 bearings

AXIS FEEDS

Rapid Traverse X, Y, & Z 1,417 IPM
Cutting Feed-rate 0.02 - 393 IPM 10m / minute

TOOL CHANGER
Tool Capacity (30+1) 30-Tool Twin-Arm Hi-Speed Tool Changer
Tool Shank CAT#40 Taper
Tool Change Time 1.7-sec. tool-to-tool
Maximum Tool Diameter / w/adjacent tool 5.90” / 3.15” 150mm / 80mm
Maximum Tool Length (from gage line) 11.81” 300mm
Maximum Tool Weight 15 lbs. 7kg
Tool Selection / Tool Access Random access Bi-directional shortest path

Air Service Requirements 85 psi @ 14-scfm
Electrical Requirements - connected load 220vac ±5%, 60-Hz 50-Amp Service 25 KVA
Coolant Capacity 68-gallons / 300 psi

Floor space requirements (W x D x H) 86” x 81” x 113” 221x206x288cm
(add 45” for conveyor)
Shipping dimensions (W x D x H) 97” x 91” x 101” 246x229x256cm
Machine Weight 10,582 pounds 4,800 kg